Engine Harness, 1972 GTO

V8, With A/C & Gauges

This harness attaches at the firewall to the bulkhead connector (back of the fuse box) and routes along the firewall. It contains all of the following wires:

• Spade terminal with black/pink resistance wire, and yellow wire for the Coil
• 1 way connector with light blue/black wire for the Wiper Motor
• 2 way connector with black/white and black/yellow wires for the Wiper Motor
• 2 way connector with dark blue/white and 2 black/yellow wires for the Wiper Motor
• Rubber mold-on connector with black wire for the Speedometer Control Spark Switch
• Rubber mold-on connector with black/orange wire for the Transmission Downshift Switch
• Rubber mold-on connector with dark blue wire for the Oil Pressure Sending Unit
• 2 way connector with dark blue and black wires for the Vacuum Solenoid
• 3 way connector with dark blue and 2 yellow wires for the SCS Temperature Sending Unit
• 1 way connector with dark green wire for the Temperature Sending Unit
• 2 way connector with black/orange and brown wires that mates to the Air Conditioning Harness (M&H Part Number 30220)
• 3 way connector with black, brown and dark green wires for the Air Conditioning Thermal Limiter
• 2 way connector with dark green and black wires for the Air Conditioning Compressor
• Spade terminal with black wire for the Air Conditioning Compressor ground
• Rubber mold-on connector with black wire for the Air Conditioning Freon Pressure Switch
• Rubber mold-on connector with a yellow wire for the Idle Stop Solenoid
• 2 way connector with brown and red wires for the Alternator
• Ring terminal with 2 black/red wires for the Alternator
• Ring terminal with red wire for the "Bat" terminal on the Starter Solenoid
• Ring terminal with yellow for the "R" terminal on the Starter Solenoid
• Ring terminal with purple wire for the "S" terminal on the Starter Solenoid

M&H Part Number: 40612

$351.00